Country Guide — Denmark (DK)

Short answer: yes — a Japanese console works in Denmark. Sets with a USB power cable need no transformer; items with the original Japanese 100V adapter need a step-down transformer (230V → 100V). Each product page says which power supply comes in the box. Everything you need to know is explained below.

Already know what you need? Every console we sell is opened, cleaned and bench-tested here in Japan before it is listed. We only sell what we have held in our own hands.

See consoles in stock → · See games in stock →

Play Japanese (NTSC-J) consoles safely with a clean picture

TL;DR

  • Power (230 V): Sets with a USB power cable plug into a USB charger — no transformer. GameCube sets need a USB-C PD charger of 45W or more. Items with the original Japanese 100 V adapter need a step-down transformer (230 V → 100 V).

  • Video system: Denmark used PAL; Japanese consoles send NTSC at 60 Hz. CRTs with RGB SCART shine; many modern TVs need an upscaler.

  • HDMI-only TVs: Use a reputable upscaler/converter and aim for low input lag.

  • Region lock: Keep game region = console region to avoid errors.

  • Shipping & import charges: Free shipping on orders of US$100+ that include a console. On arrival you pay 25% import VAT, and parcels up to €150 also pay a flat €3 duty per item category.

1) Power in Denmark

  • Mains: 230 V / 50 Hz.

  • Rule of thumb: The power supply decides it, not the console. Never plug an original Japanese 100 V adapter straight into a Danish socket — use a 230 V → 100 V step-down transformer.

How our consoles are powered

  • Famicom, AV Famicom, Disk System and PC Engine (sets without the original box): come with a USB power cable. Plug it into a USB charger, like the one for your phone (the charger is not included). No step-down transformer is needed.

  • GameCube (sets without the original box): comes with a USB-C power attachment instead of the Japanese AC adapter. You need a USB-C PD wall charger of 45W or more and a USB-C to USB-C cable rated 45W or more. A standard phone charger will not turn it on, and a USB-A to USB-C cable will not work. No step-down transformer is needed.

  • Twin Famicom: comes with an unofficial power adapter rated up to 240 V. No step-down transformer is needed; if its plug does not fit your wall socket, a simple plug adapter is enough.

  • Boxed collector sets with the original Japanese adapter: the adapter is made for Japan’s 100 V. Use a step-down transformer (230 V → 100 V).

  • Other consoles (Super Famicom, Nintendo 64, Mega Drive, Saturn, PlayStation, PlayStation 2, Dreamcast, Neo Geo): unless the product page says a USB cable is included, they run on a Japanese 100 V power supply → step-down transformer.

Transformer sizing

  • Choose ≥ 2× the console’s rated wattage; place it with airflow; avoid cheap travel converters.

2) Video & Cables (DK)

  • Your TV system: Danish TVs were built for PAL. A Japanese console sends NTSC at 60 Hz. Over the yellow composite cable, a PAL-only TV may show it in black and white or as a rolling picture. RGB over SCART carries no colour code, so it gives full colour on any SCART TV that accepts 60 Hz.

  • Quality order: RGB/Component > S-Video > Composite.

  • SCART note: SCART is common on older European CRTs. It is ideal for 15 kHz RGB (240p) if your TV supports 60 Hz.

  • JP21 vs EU-SCART: Same plug shell, different pinout. Use EU-SCART-wired cables or a proper adapter.

  • Modern TVs: Many no longer accept the 240p signal retro consoles send. Plan on an upscaler for stable HDMI.

Console highlights

  • Super Famicom / Saturn / PS1 / Neo Geo: RGB via EU-SCART looks excellent on compatible chains.

  • N64 (JP): Composite/S-Video stock; RGB needs a mod/special adapter.

  • GameCube DOL-001: Composite/S-Video; Component via Digital AV Out (then HDMI).

  • GameCube DOL-101: No Digital AV Out (HDMI via analog adapters only).

  • Wii: Component recommended; simple HDMI adapters exist.

  • Dreamcast: VGA 480p via a VGA box → HDMI.

HDMI-only TV — basic chain
Console → (Composite / S-Video / RGB / Component) → Upscaler/Converter → HDMI → TV

  • On the TV: enable Game Mode, disable motion smoothing, prefer 240p/60 Hz-friendly processing.

3) Region & Controllers

  • Cartridges/discs: Most platforms are region-locked. Use JP software on JP hardware.

  • Controllers: SFC and SNES share the same connector and generally cross-work (minor exceptions exist).

4) Fast setup (Super Famicom on a Danish HDMI TV)

  1. With everything off, connect the SFC multi-out to RGB (EU-SCART), S-Video, or Composite.

  2. If your TV is HDMI-only, route that cable into a reputable upscaler, then HDMI to the TV.

  3. Select the HDMI input.

  4. Power: if the console came with a USB cable, plug it into a USB charger; if it came with the original Japanese adapter, plug that into the step-down transformer. Switch on the upscaler first, then the console.

  5. If unstable, set the upscaler to 240p/60 Hz and turn off motion smoothing on the TV.

5) Troubleshooting

  • Black-and-white or rolling: Your TV may not handle NTSC or 240p → use RGB SCART or an upscaler.

  • No sync over SCART: Wrong cable standard (JP21 vs EU-SCART) → swap to EU-SCART or a proper adapter.

  • GameCube will not turn on: The charger or cable is under 45W, is not USB-C PD, or is a USB-A to USB-C cable → use a 45W+ USB-C PD charger with a USB-C to USB-C cable.

  • Hum/noise: Reseat audio; try another input; reduce shared power strips.

  • No boot: Clean cartridge contacts; power-cycle; try another cable.

6) Shipping, delivery and import charges (DK)

Shipping

  • Shipping is free on orders of US$100 or more that include a console (converted to your currency at checkout).

  • Games and accessories ordered without a console are charged a flat shipping rate, whatever the total; each extra game adds only US$3.00. The exact amount is shown at checkout before you pay.

  • Orders ship within 1–3 business days (Monday–Friday, Japan time). After that, UPS usually takes 2–5 business days and Japan Post usually takes 1–3 weeks. For some items we use FedEx or DHL Express, which take about as long as UPS. Every parcel has tracking. Delivery times are estimates and can vary with customs.

Import duties and taxes

We do not collect duties or taxes at checkout, and they are not included in our prices. They are charged when the parcel enters Denmark, and you pay them to the carrier. Here is how it works in Denmark (rules as of November 2026):

  • Import VAT (moms): 25%.

  • Customs duty: since 1 July 2026, parcels with goods worth €150 or less pay a flat €3 per item category. Different kinds of goods in one parcel count separately, so a console and a game can count as two. Above €150, the normal duty rate for the goods applies.

  • The €150 is the value of the goods, not counting shipping.

  • The EU has also announced a €2 handling fee per item category, due to start from November 2026, whatever the value.

  • Who collects it: the carrier (PostNord for Japan Post parcels, or the courier) pays the VAT and duty for you and collects them when it delivers the parcel. Carriers also charge their own fee for declaring the goods; Danish Customs says it is normally DKK 150–250.

  • We cannot mark items as “gifts” or declare lower values.

  • Rules can change. Before you order, you can check the official page: Danish Customs Agency (Toldstyrelsen, in Danish). If a charge looks wrong, send us the paperwork and we will look into it with you.

Helpful links

From the shopkeeper

Whatever you settle on, every console that leaves this shop has been opened, cleaned and tested by hand — and I will tell you honestly what it can and cannot do in your country before you buy.
I am the second generation of a shop my father opened in 1986. Every console leaves here tested, and it ships from Japan with tracking.

See everything I have in stock →

Cleaned & tested by hand · Ships worldwide from Japan · eBay Top Rated Seller · 100% positive feedback on eBay from 2,500+ ratings · Region & power guide