Country Guide — Philippines (PH)

Short answer: yes — a Japanese console works in the Philippines. Sets with a USB power cable need no transformer; items with the original Japanese 100V adapter need a step-down transformer (230V → 100V). Each product page says which power supply comes in the box. Everything you need to know is explained below.

Already know what you need? Every console we sell is opened, cleaned and bench-tested here in Japan before it is listed. We only sell what we have held in our own hands.

See consoles in stock → · See games in stock →

Play Japanese (NTSC-J) consoles safely with a clean picture

TL;DR

  • Power (230 V): Sets with a USB power cable plug into a USB charger — no transformer. GameCube sets need a USB-C PD charger of 45W or more. Items with the original Japanese 100 V adapter need a step-down transformer (230 V → 100 V).

  • Video system: Japanese consoles send NTSC at 60 Hz. A TV that accepts NTSC shows full colour; the real hurdle is 240p support on modern TVs, so plan on an upscaler.

  • HDMI-only TVs: Use a reputable upscaler/converter and aim for low input lag.

  • Region lock: Keep game region = console region to avoid errors.

  • Shipping & import charges: Free shipping on orders of US$100+ that include a console. Parcels with goods worth PHP 10,000 or less pay no duty or tax; above that, 12% VAT and any duty are charged on arrival.

1) Power in the Philippines

  • Mains: 230 V / 60 Hz.

  • Rule of thumb: The power supply decides it, not the console. Never plug an original Japanese 100 V adapter straight into a Philippine socket — use a 230 V → 100 V step-down transformer.

How our consoles are powered

  • Famicom, AV Famicom, Disk System and PC Engine (sets without the original box): come with a USB power cable. Plug it into a USB charger, like the one for your phone (the charger is not included). No step-down transformer is needed.

  • GameCube (sets without the original box): comes with a USB-C power attachment instead of the Japanese AC adapter. You need a USB-C PD wall charger of 45W or more and a USB-C to USB-C cable rated 45W or more. A standard phone charger will not turn it on, and a USB-A to USB-C cable will not work. No step-down transformer is needed.

  • Twin Famicom: comes with an unofficial power adapter rated up to 240 V. No step-down transformer is needed; if its plug does not fit your wall socket, a simple plug adapter is enough.

  • Boxed collector sets with the original Japanese adapter: the adapter is made for Japan’s 100 V. Use a step-down transformer (230 V → 100 V).

  • Other consoles (Super Famicom, Nintendo 64, Mega Drive, Saturn, PlayStation, PlayStation 2, Dreamcast, Neo Geo): unless the product page says a USB cable is included, they run on a Japanese 100 V power supply → step-down transformer.

Transformer sizing

  • Choose ≥ 2× the console’s rated wattage; place it with airflow; avoid cheap travel converters.

2) Video & Cables (PH)

  • Your TV system: A Japanese console sends NTSC at 60 Hz. Any TV that accepts NTSC shows it in full colour. Over the yellow composite cable, a TV that does not accept NTSC may show it in black and white or as a rolling picture; an upscaler avoids this.

  • Quality order: RGB/Component > S-Video > Composite.

  • RGB note: Japanese RGB uses JP21. It looks like European SCART but is wired differently, so feed it into an upscaler that accepts JP21 or use a proper adapter.

  • Modern TVs: Many no longer accept the 240p signal retro consoles send. Plan on an upscaler for stable HDMI.

Console highlights

  • Super Famicom / Saturn / PS1 / Neo Geo: Output RGB (JP21). Use an upscaler that accepts JP21/SCART, or a proper adapter.

  • N64 (JP): Composite/S-Video stock; RGB needs a mod/special adapter.

  • GameCube DOL-001: Composite/S-Video; Component via Digital AV Out (then HDMI).

  • GameCube DOL-101: No Digital AV Out (HDMI via analog adapters only).

  • Wii: Component recommended; simple HDMI adapters exist.

  • Dreamcast: VGA 480p via a VGA box → HDMI.

HDMI-only TV — basic chain
Console → (Composite / S-Video / RGB / Component) → Upscaler/Converter → HDMI → TV

  • On the TV: enable Game Mode, disable motion smoothing, prefer 240p/60 Hz-friendly processing.

3) Region & Controllers

  • Cartridges/discs: Most platforms are region-locked. Use JP software on JP hardware.

  • Controllers: SFC and SNES share the same connector and generally cross-work (minor exceptions exist).

4) Fast setup (Super Famicom on a Philippine HDMI TV)

  1. With everything off, connect the SFC multi-out to RGB (via an upscaler), S-Video, or Composite.

  2. If your TV is HDMI-only, route that cable into a reputable upscaler, then HDMI to the TV.

  3. Select the HDMI input.

  4. Power: if the console came with a USB cable, plug it into a USB charger; if it came with the original Japanese adapter, plug that into the step-down transformer. Switch on the upscaler first, then the console.

  5. If unstable, set the upscaler to 240p/60 Hz and turn off motion smoothing on the TV.

5) Troubleshooting

  • Black-and-white or rolling: Your TV may not handle NTSC or 240p → use an upscaler.

  • No picture over RGB: JP21 and SCART are wired differently → use an upscaler that accepts JP21, or the correct adapter.

  • GameCube will not turn on: The charger or cable is under 45W, is not USB-C PD, or is a USB-A to USB-C cable → use a 45W+ USB-C PD charger with a USB-C to USB-C cable.

  • Hum/noise: Reseat audio; try another input; reduce shared power strips.

  • No boot: Clean cartridge contacts; power-cycle; try another cable.

6) Shipping, delivery and import charges (PH)

Shipping

  • Shipping is free on orders of US$100 or more that include a console (converted to your currency at checkout).

  • Games and accessories ordered without a console are charged a flat shipping rate, whatever the total; each extra game adds only US$3.00. The exact amount is shown at checkout before you pay.

  • Orders ship within 1–3 business days (Monday–Friday, Japan time). After that, UPS usually takes 2–5 business days and Japan Post usually takes 1–3 weeks. For some items we use FedEx or DHL Express, which take about as long as UPS. Every parcel has tracking. Delivery times are estimates and can vary with customs.

Import duties and taxes

We do not collect duties or taxes at checkout, and they are not included in our prices. They are charged when the parcel enters the Philippines, and you pay them to the carrier. Here is how it works in the Philippines (rules as of November 2026):

  • PHP 10,000 or less: no customs duty and no tax. The PHP 10,000 is the value of the goods, not counting shipping to the Philippines.

  • Above PHP 10,000: 12% VAT, plus customs duty if the goods carry it.

  • By Japan Post: PHLPost collects any duty and tax that the Bureau of Customs assesses, and may charge its own fee.

  • By UPS or another courier: the courier clears the parcel and bills you the duty and tax, plus its own fee for handling customs, which each courier sets itself.

  • We cannot mark items as “gifts” or declare lower values.

  • Rules can change. Before you order, you can check the official page: Bureau of Customs (Philippines). If a charge looks wrong, send us the paperwork and we will look into it with you.

Helpful links

From the shopkeeper

Whatever you settle on, every console that leaves this shop has been opened, cleaned and tested by hand — and I will tell you honestly what it can and cannot do in your country before you buy.
I am the second generation of a shop my father opened in 1986. Every console leaves here tested, and it ships from Japan with tracking.

See everything I have in stock →

Cleaned & tested by hand · Ships worldwide from Japan · eBay Top Rated Seller · 100% positive feedback on eBay from 2,500+ ratings · Region & power guide